Hobbico FlyZone Cessna 182 EP RTF w/2.4GHz Radio HCAA2505
This is the electric powered, radio controlled, ready-to-fly,
FlyZone Cessna 182 Skylane Airplane with the Tactic 2.4GHz Radio
Features
-
Hobbico FlyZone Cessna 182 EP RTF w/2.4GHz Radio HCAA2505
-
Construction: Foam
-
Wings: One-piece reinforced
-
Radio: Tactic TTX440 4-channel
2.4GHz
-
Electronic Speed Control:
-
Motor: 380 size
-
Landing Gear: Prebent .059"
(1.5mm) thick aluminum with prebent wire nosegear
-
Wheels: Three 1" (25mm)
diameter foam
-
Propeller: Two 7x3, one
installed and one spare
-
Spinner: 1" (26mm) diameter,
Black in color
-
Battery: ElectriFly 7N-J
7-cell 8.4V 1100mAh NiMH (GPMP7700) with Red 2-pin connector
-
Charger: 12V DC Peak
(GPMM7700)
-
Cowl: ABS plastic
-
Wheel Pants: ABS plastic
-
Warranty: Hobbico guarantees
this kit free from defects in both material and workmanship at the date of
purchase. This warranty does not cover any component parts damaged by use or
modification.
Specifications
-
Wingspan: 35" (890mm)
-
Length: 27.5" (700mm)
-
Center of Gravity (CG):
Prebalanced at factory but should be confirmed using the following
procedure;
-
Place marks on bottom of wing
between 1-7/16" (36mm) and 1¾" (44mm) back from the front of the wing next
to the fuselage.
-
Lift airplane with fingertips,
it should balance between the marks.
-
If it doesn't balance within
this area, weight must be added to nose or tail.
-
Control Throws-
-
Ailerons, Up and Down: 3/16"
(5mm)
-
Elevator, Up and Down: 5/16"
(8mm)
-
Rudder, Right and Left: 3/8"
(10mm)
Contents
-
FlyZone Cessna 182 Skylane Airplane with 380 size motor, two 7x3
props, spinner, 4-ch 2.4GHz radio w/3 micro servos, -ch receiver,
ElectriFly battery and charger, Electronic Speed Control, phillips
head screwdriver and illustrated instruction manual
Requirements
Comments
|
|
